Template:Cite AV media/doc

Usage

Copy a blank version to use. Almost all parameter names are supported only in lower case (some initialisms, such as |isbn= have upper case aliases like |ISBN=, which are acceptable for use). Use the "|" (pipe) character between each parameter. Unused parameters may be deleted to avoid clutter in the edit window. Some samples on this documentation page may include the current date. If the date is not current, then the page.

Horizontal list:

{{cite AV media |people= |date= |title= |trans-title= |medium= |language= |url= |access-date= |archive-url= |archive-date= |format= |time= |location= |publisher= |id= |isbn= |oclc= |quote= |ref=}}

Vertical format: Template:Pre2

Examples

• {{cite AV media | people=Fouladkar, Assad (director) | date=May 15, 2003 | title=Lamma hikyit Maryam | trans-title = When Maryam Spoke Out | medium=Motion picture | location=Lebanon | publisher=Fouladkar, Assad}}

Fouladkar, Assad (director) (May 15, 2003). Lamma hikyit Maryam [When Maryam Spoke Out] (Motion picture). Lebanon: Fouladkar, Assad.

Parameters

Syntax

Nested parameters rely on their parent parameters:

• parent
• OR: parent2—may be used instead of parent
  • child—may be used with parent (and is ignored if parent is not used)
  • OR: child2—may be used instead of child (and is ignored if parent2 is not used)

Where aliases are listed, only one of the parameters may be defined; if multiple aliased parameters are defined, then only one will show.

If non-hyphenated aliases of parameters with hyphens are defined, they exist only for legacy support (and are subject to become unsupported in the future); therefore, to streamline the appearance and improve consistency, select the hyphenated variant when adding parameters to a citation template and also consider switching already present non-hyphenated parameters to their hyphenated equivalents at the same time.

By default, sets of fields are terminated with a period (.).

COinS

This template embeds COinS metadata in the HTML output, allowing reference management software to retrieve bibliographic metadata. See Wikipedia:COinS. As a general rule, only one data item per parameter. Do not include explanatory or alternate text:

• use |date=27 September 2007 not |date=27 September 2007 (print version 25 September)

Use of templates within the citation template is discouraged because many of these templates will add extraneous HTML or CSS that will be included raw in the metadata. Also, HTML entities, for example  , –, etc., should not be used in parameters that contribute to the metadata.

COinS metadata is created for these parameters

Note: This table of metadata is displayed for all Citation Style 1 templates. Not all of these parameters are supported by every CS1 template. Some of these parameters are mutually exclusive, some are aliases of another parameter, and some require other parameters to be present. Please refer to each template's documentation for a full list of supported parameters, their aliases, and their dependencies.

• |periodical=, |journal=, |newspaper=, |magazine=, |work=, |website=, |encyclopedia=, |encyclopaedia=, |dictionary=
• |chapter=, |script-chapter=, |contribution=, |script-contribution=, |entry=, |script-entry=, |article=, |script-article=, |section=, |script-section=
• |title=, |script-title=, |book-title=, |booktitle=
• |publication-place=, |place=, |location=, |publicationplace=
• |date=, |year=, |publication-date=, |publicationdate=
• |series=, |version=
• |volume=, |issue=, |number=
• |page=, |pages=, |at=, |quote-page=, |quote-pages=
• |edition=
• |publisher=, |institution=
• |url=, |chapter-url=, |contribution-url=, |section-url=, |chapterurl=, |contributionurl=, |sectionurl=
• |author-last=, |author-last#=, |author#-last=, |author-surname=, |author-surname#=, |author#-surname=, |last=, |last#=, |surname=, |surname#=, |author=, |author#=, |subject=, |subject#=, |host=, |host#=
• |author-first=, |author-first#=, |author#-first=, |author-given=, |author-given#=, |author#-given=, |first=, |first#=, |given=, |given#=
• |degree=
• |arxiv=, |bibcode=, |biorxiv=, |citeseerx=, |doi=, |eissn=, |eprint=, |hdl=, |isbn=, |issn=, |jfm=, |jstor=, |lccn=, |message-id=, |mr=, |oclc=, |osti=, |pmc=, |pmid=, |rfc=, |ssrn=, |s2cid=, |zbl=

Deprecated

Deprecated CS1/CS2 parameters

Deprecated parameter	Replace with
|class=	Supported only by {{cite arXiv}} – remove, or use {{cite arXiv}} if appropriate.
|deadurl=	|url-status= to one of the following values as appropriate: dead, live, unfit, usurped
|dead-url=
|laysummary=	|lay-url=
|lay-summary=
|registration=	Set one of the following to subscription or registration as appropriate: |url-access=, |chapter-url-access=, |entry-url-access=, |article-url-access=, |section-url-access= (detailed documentation here).
|subscription=

In addition to the above list(s) of deprecated and removed parameters, all non-hyphenated aliases of parameters with hyphens are discouraged to be used in citation templates and are kept only for legacy support. They are subject to becoming deprecated and unsupported in the future as well. To streamline the appearance and improve consistency across the project, these variants should no longer be used when adding parameters to citation templates. Instead, select the hyphenated parameter variants and also consider switching other non-hyphenated parameters, which may be present in a citation already, to their hyphenated equivalents at the same time.

Description

Authors

• last: Surname of a single author. Do not wikilink—use author-link instead. For corporate authors or authors for whom only one name is listed by the source, use last or one of its aliases (e.g. |author=Bono). Aliases: surname, author, last1, surname1, author1.
  • author: this parameter is used to hold the complete name of a single author (first and last) or to hold the name of a corporate author. This parameter should never hold the names of more than one author. Do not wikilink—use author-link instead.
  • first: Given or first names of author; for example: Firstname Middlename or Firstname M. or Firstname M., Sr. Do not wikilink—use author-link instead. Aliases: given, first1, given1. Requires last; first name will not display if last is empty.
  • OR: for multiple authors, use last1, first1 through lastn, firstn, where n is any consecutive number for an unlimited number of authors (each firstn requires a corresponding lastn, but not the other way around). See the display parameters to change how many authors are displayed. Aliases: surname1, given1 through surnamen, givenn, or author1 through authorn. For an individual author plus an institutional author, you can use |first1=...|last1=...|author2=....
  • author-link: Title of existing Wikipedia article about the author—not the author's website; do not wikilink. Aliases: author-link1, authorlink, authorlink1, author1-link, author1link.
  • OR: for multiple authors, use author-link1 through author-linkn. Aliases: authorlink1 through authorlinkn, or author1-link through authorn-link, or author1link through authornlink.
  • name-list-style: accepts a limited list of keywords as value; when set to amp, ampersand, or &, inserts an ampersand between the last two names in a name list; when set to and, inserts the conjunction 'and' between the last two names of a name list; when set to vancdisplays name lists in Vancouver style when the lists use the last/first forms of name parameters. Alias: name-list-format (deprecated)
• vauthors: comma-separated list of author names in Vancouver style; enclose corporate or institutional author names in doubled parentheses. End with etal if appropriate:

  |vauthors=Smythe JB, ((Megabux Corp.)), etal

  • author-link and author-mask may be used for the individual names in |vauthors= as described above
• authors: Free-form list of author names; use of this parameter is discouraged because it does not contribute to a citation's metadata; not an alias of last.
• translator-last: Surname of translator. Do not wikilink—use translator-link instead. Aliases: translator-surname, translator1, translator1-last, translator-last1.
  • translator-first: Given or first names of translator. Do not wikilink—use translator-link instead. Aliases: translator-given, translator1-first, translator-first1.
  • OR: for multiple translators, use translator-last1, translator-first1 through translator-lastn, translator-firstn, where n is any consecutive number for an unlimited number of translators (each translator-firstn requires a corresponding translator-lastn, but not the other way around). Aliases: translator1-last, translator1-first through translatorn-last, translatorn-first, or translator1 through translatorn.
  • translator-link: Title of existing Wikipedia article about the translator—not the translator's website; do not wikilink. Aliases: translator-link1, translator1-link.
  • OR: for multiple translators, use translator-link1 through translator-linkn. Aliases: translator1-link through translatorn-link.
• collaboration: Name of a group of authors or collaborators; requires author, last, or vauthors listing one or more primary authors; follows author name-list; appends "et al." to author name-list.
• others: To record other contributors to the work, including illustrators. For the parameter value, write Illustrated by John Smith.
• Note: When using shortened footnotes or parenthetical referencing styles with templates, do not use multiple names in one field, or else the anchor will not match the inline link.

Title

(See also Help:Citation Style 1 § Titles and chapters.)

• title: Title of source. Can be wikilinked to an existing Wikipedia article or url may be used to add an external link, but not both. Displays in italics. If script-title is defined, use title to hold a Romanization (if available) of the title in script-title.
  • script-title: Original title for languages that do not use a Latin-based script (Arabic, Chinese, Cyrillic, Greek, Hebrew, Japanese, Korean, etc.); not italicized, follows italicized Romanization defined in title (if present). Must be prefixed with one of the supported language codes to help browsers properly display the script:

    ... |title=Tōkyō tawā |script-title=ja:東京タワー |trans-title=Tokyo Tower ...

  • trans-title: English translation of the title if the source cited is in a foreign language. Displays in square brackets after title; if url is defined, then trans-title is included in the link. Use of the language parameter is recommended.

Titles containing certain characters will not display and link correctly unless those characters are encoded.

newline	[	]	|
space	[	]	{{!}} (preferred)
	{{bracket|text}}		| or {{pipe}} – see also Help:Table § Rendering the pipe

• title-link: Title of existing Wikipedia article about the source named in title – do not use a web address; do not wikilink. Alias: titlelink.

• type: Provides additional information about the media type of the source. May alternatively be used to identify the type of manuscript linked to in the title, if this is not the final version of a manuscript (e.g. if a preprint of a manuscript is freely available, but the version of record is behind a paywall). Format in sentence case. Displays in parentheses following the title. The reserved keyword none can be used to disable the display of a type. Examples: Thesis, Booklet, Accepted manuscript, CD liner, Press release. Alias: medium. Use one of the following as applicable: Motion picture, Television production, Videotape, DVD, Blu-ray, Trailer, CD, Radio broadcast, Podcast.

• language: The language (or a comma-separated list of the languages) in which the source is written, as either the ISO 639 language code (preferred) or the full language name. Examples: |language=ru; |lang=fr, pt-br; |lang=Russian; |language=French, Portuguese. See the list of supported codes and names. Do not use templates or wikilinks. Displays in parentheses with "in" before the language name or names. When the only source language is English, no language is displayed in the citation. The use of languages recognized by the citation module adds the page to the appropriate subcategory of Category:CS1 foreign language sources. Because cs1|2 templates are often copied from en.wiki to other wikis, the use of language codes is preferred so that language names render in the correct language and form: español at a French-language wiki instead of the English word "Spanish". Aliases: lang

Date

• date: Date of referenced source. Can be full date (day, month, and year) or partial date (month and year, season and year, or year). Use same format as other publication dates in the citations. Required when year is used to disambiguate {{sfn}} links to multiple-work citations by the same author in the same year.^[more] Do not wikilink. Displays after the authors and is enclosed in parentheses. If there is no author, then displays after publisher.. For acceptable date formats, see Help:Citation Style 1 § Dates.

For approximate year, precede with "c. ", like this: |date=c. 1900.

For no date, or "undated", use |date=n.d.

Automatic date formatting: Citation Style 1 and 2 templates, including this template, automatically render dates in all date parameters (such as |date=, |publication-date=, |access-date=, |archive-date=, etc.) except for |orig-date= in the style specified by the article's {{use dmy dates}} or {{use mdy dates}} template. See those templates' documentation for details.

• year: Year of source being referenced. The usage of this parameter is discouraged; use the more flexible |date= parameter instead unless both of the following conditions are met:
  1. The |date= format is YYYY-MM-DD.
  2. The citation requires a CITEREF disambiguator.
• orig-date: Original publication date or year; displays in square brackets after the date (or year). For clarity, please supply specifics. For example: |orig-date=First published 1859 or |orig-date=Composed 1904. As |orig-date= does not support automatic date formatting, use the same date format as defined by |df= (or, if it exists in the article, by |cs1-dates= of a {{use dmy dates}} or {{use mdy dates}} template), or as used in the |date= parameter. Alias: orig-year, origyear
• df: date format; sets rendered dates to the specified format; does not support date ranges or seasonal dates; overrides the automatic date formatting described above. Accepts one value which may be one of these:

  dmy – set publication dates to day month year format; access- and archive-dates are not modified;

  mdy – as above for month day, year format

  ymd – as above for year initial numeric format YYYY-MM-DD

  dmy-all – set publication, access-, and archive-dates to day month year format;

  mdy-all – as above for month day, year format

  ymd-all – as above for year initial numeric format YYYY-MM-DD

Publisher

• publisher: Name of publisher; may be wikilinked if relevant. The publisher is the company, organization or other legal entity that publishes the work being cited. Do not use the publisher parameter for the name of a work (e.g. a website, book, encyclopedia, newspaper, magazine, journal, etc.). If the name of the publisher changed over time use the name as stated in the publication or at the time of the source's publication. Corporate designations such as "Ltd", "Inc.", or "GmbH" are not usually included. Not normally used for periodicals. Omit where the publisher's name is substantially the same as the name of the work (for example, The New York Times Co. publishes The New York Times newspaper, so there is no reason to name the publisher). Displays after title.
• place: For news stories with a dateline, that is, the location where the story was written. If the name of the location changed over time use the name as stated in the publication or at the time of the source's publication. In earlier versions of the template this was the publication place, and for compatibility, will be treated as the publication place if the publication-place parameter is absent; see that parameter for further information. Alias: location
• publication-place: Geographical place of publication; generally not wikilinked; omit when the name of the work includes the publication place; examples: The Boston Globe, The Times of India. Displays after the title. If the name of the publication place changed over time use the name as stated in the publication or at the time of the source's publication. If only one of publication-place, place, or location is defined, it will be treated as the publication place and will show after the title; if publication-place and place or location are defined, then place or location is shown before the title prefixed with "written at" and publication-place is shown after the title.
• publication-date: Date of publication when different from the date the work was written. Displays only if date (or year) are defined and only if different, else publication-date is used and displayed as date. Use the same format as other dates in the article; do not wikilink. Follows publisher; if work is not defined, then publication-date is preceded by "published" and enclosed in parenthesis.
• via: Name of the content deliverer (if different from publisher). via is not a replacement for publisher, but provides additional detail. It may be used when the content deliverer presents the source in a format other than the original (e.g. NewsBank), when the URL provided does not make clear the identity of the deliverer, where no URL or DOI is available (EBSCO), or if the deliverer requests attribution. See the access level parameters to display access restrictions.

Edition, series, volume

• edition: When the publication has more than one edition; for example: "2nd", "Revised", and so forth. Appends the string " ed." after the field, so |edition=2nd produces "2nd ed." Does not display if a periodical field is defined.

• series or version: When the source is part of a series, such as a book series or a journal where the issue numbering has restarted.

• volume: For one publication published in several volumes. Displays after the title and series fields; volume numbers should be entered just as a numeral (e.g. 37); volume values that are wholly digits, wholly uppercase Roman numerals, or less than five characters will appear in bold. Any non-numeric value of five or more characters will be presumed to follow some other convention and will not appear in bold. In rare cases publications carry both, an ongoing volume and a year-related value), if so, provide them both, for example |volume=IV / #10.

In-source locations

• page: The number of a single page in the source that supports the content. Use either |page= or |pages=, but not both. Displays preceded by p. unless |no-pp=yes. If hyphenated, use {{hyphen}} to indicate this is intentional (e.g. |page=3{{hyphen}}12), otherwise several editors and semi-automated tools will assume this was a misuse of the parameter to indicate a page range and will convert |page=3-12 to |pages=3{{ndash}}12. Alias: p.
• OR: pages: A range of pages in the source that supports the content. Use either |page= or |pages=, but not both. Separate using an en dash (–); separate non-sequential pages with a comma (,); do not use to indicate the total number of pages in the source. Displays preceded by pp. unless |no-pp=yes.
  Hyphens are automatically converted to en dashes; if hyphens are appropriate because individual page numbers contain hyphens, for example: pp. 3-1–3-15, use double parentheses to tell the template to display the value of |pages= without processing it, and use {{hyphen}} to indicate to editors that a hyphen is really intended: |pages=((3{{hyphen}}1{{ndash}}3{{hyphen}}15)). Alternatively, use |at=, like this: |at=pp. 3-1–3-15. Alias: pp.
  • no-pp: Set to yes, y, or true to suppress the p. or pp. notations where this is inappropriate; for example, where |page=Front cover or |pages=passim.
• OR: at: For sources where a page number is inappropriate or insufficient. Overridden by |page= or |pages=. Use only one of |page=, |pages=, or |at=.
  Examples: page (p.) or pages (pp.); section (sec.), column (col.), paragraph (para.); track; hours, minutes and seconds; act, scene, canto, book, part, folio, stanza, back cover, liner notes, indicia, colophon, dust jacket, verse.
• For |quote-page= and |quote-pages= used in conjunction with |quote=, see here.

URL

• url: URL of an online location where the media named by title can be found. Cannot be used if title is wikilinked. If applicable, the link may point to the specific page(s) referenced. Remove tracking parameters from URLs, e.g. #ixzz2rBr3aO94 or ?utm_source=google&utm_medium=...&utm_term=...&utm_campaign=.... For linking to pages in PDF files or in Google Books, see WP:PAGELINKS. Do not link to any commercial booksellers, such as Amazon; use |isbn= or |oclc= to provide neutral search links for books. Invalid URLs, including those containing spaces, will result in an error message.
  • access-date: Full date when the content pointed to by url was last verified to support the text in the article; do not wikilink; requires url; use the same format as other access and archive dates in the citations. Not required for linked documents that do not change. For example, access-date is required for online sources, such as personal websites, that do not have a publication date; see WP:CITEWEB. Access dates are not required for links to published research papers, published books, or news articles with publication dates. Note that access-date is the date that the URL was found to be working and to support the text being cited. See "Automatic date formatting" above for details about interaction with {{use dmy dates}} and {{use mdy dates}}. Can be hidden or styled by registered editors. Alias: accessdate.
  • archive-url: The URL of an archived snapshot of a web page. Typically used to refer to services such as Internet Archive (see Wikipedia:Using the Wayback Machine), WebCite (see Wikipedia:Using WebCite) and archive.is (see Wikipedia:Using archive.is); requires archive-date and url. By default (overridden by |url-status=live) the archived link is displayed first, with the original link at the end. Alias: archiveurl.
    • archive-date: Archive-service snapshot-date; preceded in display by default text "archived from the original on". Use the same format as other access and archive dates in the citations. This does not necessarily have to be the same format that was used for citing publication dates. Do not wikilink; templated dates are discouraged. See "Automatic date formatting" above for details about interaction with {{use dmy dates}} and {{use mdy dates}}. Alias: archivedate.
    • url-status: this optional parameter is ignored if archive-url is not set. If omitted, or with null value, the default value is |url-status=dead. When the URL is still live, but pre-emptively archived, then set |url-status=live; this changes the display order, with the title retaining the original link and the archive linked at the end. When the original URL has been usurped for the purposes of spam, advertising, or is otherwise unsuitable, setting |url-status=unfit or |url-status=usurped suppresses display of the original URL (but |url= and |archive-url= are still required).
    • archive-format: File format of the work referred to by archive-url; for example: PDF, DOC, or XLS; displayed in parentheses after the archive link. HTML is implied and should not be specified. File format annotation is automatically rendered when a PDF icon is displayed. Does not change the external link icon. Note: External link icons do not include alt text; thus, they do not add file format information for the visually impaired. See Using |format=
  • url-access: See Access indicators for url-holding parameters
• format: File format of the work referred to by url; for example: PDF, DOC, or XLS; displayed in parentheses after title. (For media format, use type.) HTML is implied and should not be specified. File format annotation is automatically rendered when a PDF icon is displayed. Does not change the external link icon. Note: External link icons do not include alt text; thus, they do not add file format information for the visually impaired. See Using |format=

URLs must begin with a supported URI scheme. http:// and https:// will be supported by all browsers; however, ftp://, gopher://, irc://, ircs://, mailto: and news: may require a plug-in or an external application and should normally be avoided. IPv6 host-names are currently not supported.

If URLs in citation template parameters contain certain characters, then they will not display and link correctly. Those characters need to be percent-encoded. For example, a space must be replaced by %20. To encode the URL, replace the following characters with:

space	"	'	<	>	[	]	{	|	}
%20	%22	%27	%3C	%3E	%5B	%5D	%7B	%7C	%7D

Single apostrophes do not need to be encoded; however, unencoded multiples will be parsed as italic or bold markup. Single curly closing braces also do not need to be encoded; however, an unencoded pair will be parsed as the double closing braces for the template transclusion.

Anchor

• ref: the citation's HTML anchor identifier, when different from its default. When set, |ref=ID generates an anchor with the given ID (the id= attribute in the citation's <cite id="ID"> HTML tag). Setting |ref=ID identifies the template as a target and allows wikilinking to full references, especially useful with short-form citations like shortened notes and parenthetical referencing. The default anchor ID is suitable for use with {{sfn}} and {{harv}} templates. Since April 2020, the parameter / keyword pair |ref=harv has no special meaning; |ref=harv may be removed from existing cs1|2 templates. To inhibit anchor ID creation, set |ref=none. Aliases: none. See Template:Citation/doc § Anchors for Harvard referencing templates.

Identifiers

• id: A unique identifier, used where none of the specialized identifiers are applicable; wikilink or use a template as applicable. For example, |id=NCJ 122967 will append "NCJ 122967" at the end of the citation. You can use templates such as |id={{NCJ|122967}} to append NCJ 122967 instead.

The following identifiers create links and are designed to accept a single value. Using multiple values or other text will break the link and/or invalidate the identifier. In general, the parameters should include only the variable part of the identifier, e.g. |rfc=822 or |pmc=345678.

• arxiv: arXiv identifier; for example: |arxiv=hep-th/9205027 (before April 2007) or |arxiv=0706.0001 (April 2007 – December 2014) or |arxiv=1501.00001 (since January 2015). Do not include extraneous file extensions like ".pdf" or ".html". Aliases: eprint.
• asin: Amazon Standard Identification Number; if first character of asin value is a digit, use isbn. Because this link favours one specific distributor, include it only if standard identifiers are not available. Example |asin=B00005N5PF. Aliases: ASIN.
  • ASIN-TLD: ASIN top-level domain for Amazon sites other than the US; valid values: au, br, ca, cn, co.jp, co.uk, de, es, fr, it, mx. Aliases: asin-tld.
• bibcode: bibcode; used by a number of astronomical data systems; for example: 1974AJ.....79..819H. Aliases: none.
• biorxiv: bioRxiv id, as in the entire DOI (e.g. 10.1101/078733 for http://biorxiv.org/content/early/2016/10/01/078733 or https://doi.org/10.1101/078733; 10.1101/2020.07.24.220400 for https://doi.org/10.1101/2020.07.24.220400). Aliases: none.
• citeseerx: CiteSeerX id, a string of digits and dots found in a CiteSeerX URL (e.g. 10.1.1.176.341 for http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.176.341). Aliases: none.
• doi: Digital object identifier; for example: 10.1038/news070508-7. It is checked to ensure it begins with (10.). Aliases: DOI.
  • Supports accept-this-as-written markup to indicate valid DOIs using a non-standard format, see below.
  • doi-broken: Date a valid DOI was found to be non-working/inactive at https://doi.org. Use the same format as other dates in the article. Aliases: doi-broken-date, doi-inactive-date.
• eissn: International Standard Serial Number for the electronic media of a serial publication; eight characters may be split into two groups of four using a hyphen, but not an en dash or a space; example |eissn=1557-2986. Aliases: EISSN.
  • Supports accept-this-as-written markup to indicate valid eISSNs using a non-standard format, see below.
• hdl: Handle System identifier for digital objects and other resources on the Internet; example |hdl=20.1000/100. Aliases: HDL.
• isbn: International Standard Book Number; for example: 978-0-8126-9593-9. (See Wikipedia:ISBN and ISBN § Overview.) Hyphens in the ISBN are optional, but preferred. Use the ISBN actually printed on or in the book. Use the 13-digit ISBN – beginning with 978 or 979 – when it is available. If only a 10-digit ISBN is printed on or in the book, use it. ISBNs can be found on the page with the publisher's information – usually the back of the title page – or beneath the barcode as a number beginning with 978 or 979 (barcodes beginning with any other numbers are not ISBNs). For sources with the older 9-digit SBN system, use . Do not convert a 10-digit ISBN to 13-digit by just adding the 978 prefix; the last digit is a calculated check digit and just making changes to the numbers will make the ISBN invalid. This parameter should hold only the ISBN without any additional characters. It is checked for length, invalid characters – anything other than numbers, spaces, and hyphens, with "X" permitted as the last character in a 10-digit ISBN – and the proper check digit. Aliases: ISBN, isbn13, ISBN13.
  • Supports accept-this-as-written markup to indicate valid ISBNs using a non-standard format, see below.
• ismn: International Standard Music Number; for example: 979-0-9016791-7-7. Hyphens or spaces in the ISMN are optional. Use the ISMN actually printed on or in the work. This parameter should hold only the ISMN without any additional characters. It is checked for length, invalid characters – anything other than numbers, spaces, and hyphens – and the proper check digit. Aliases: ISMN.
• issn: International Standard Serial Number; eight characters may be split into two groups of four using a hyphen, but not an en dash or a space; example |issn=2049-3630. Aliases: ISSN.
  • Supports accept-this-as-written markup to indicate valid ISSNs using a non-standard format, see below.
• jfm: ; do not include "JFM" in the value; example |jfm=53.0144.01. Aliases: JFM.
• jstor: JSTOR reference number; for example: |jstor=3793107. Aliases: JSTOR.
• LCCN: Library of Congress Control Number. When present, alphabetic prefix characters are to be lower case and without a space; example |lccn=79-57364 or |lccn=2004042477 or |lccn=e09001178. Aliases: lccn.
• MR: Mathematical Reviews; example |mr=630583. Aliases: mr.
• OCLC: OCLC Number for looking up publications in the WorldCat union catalog; example |oclc=9355469. Aliases: oclc.
• ol: Open Library identifier; do not include "OL" in the value; example |ol=7030731M. Aliases: OL.
• OSTI: Office of Scientific and Technical Information; example |osti=4367507. Aliases: osti.
• PMC: PubMed Central; use article number for open repository full-text of a journal article, e.g. |pmc=345678. Do not include "PMC" in the value. See also the PMID parameter, below; these are two different identifiers.. Aliases: pmc.
  • embargo: Date that PMC goes live; if this date is in the future, then PMC is not linked until that date. Aliases: none.
• PMID: PubMed; use unique identifier; example |pmid=17322060 See also the PMC parameter, above; these are two different identifiers. Aliases: pmid.
• RFC: Request for Comments; example |rfc=3143. Aliases: rfc.
• : Standard Book Number; example |sbn=356-02201-3. Aliases: .
  • Supports accept-this-as-written markup to indicate valid SBNs using a non-standard format, see below.
• SSRN: Social Science Research Network; example |ssrn=1900856. Aliases: ssrn.
• : Semantic Scholar corpus ID; example |s2cid=37220927. Aliases: .
• ZBL: ; example |zbl=0472.53010 For zbMATH search results like JFM 35.0387.02 use |jfm=35.0387.02. Aliases: zbl.

In very rare cases, valid identifiers (f.e., as actually printed on publications) do not follow their defined standard format or use non-conforming checksums, which would typically cause an error message to be shown. Do not alter them to match a different checksum. In order to suppress the error message, some identifiers (|doi=, |eissn=, |isbn=, |issn=, and |sbn=) support a special accept-this-as-written markup which can be applied to disable the error-checking (as |<param>=((<value>))). If the problem is down to a mere typographical error in a third-party source, correct the identifier value instead of overriding the error message.

For some identifiers, it is possible to specify the access status using the corresponding |<param>-access= parameter.

For {{cite journal}}, some identifiers (specifying free resources) will automatically be linked to the title when |url= and |title-link= are not used to specify a different link target. This behaviour can be overridden by one out of a number of special keywords for |title-link= to manually select a specific source (|title-link=pmc or |title-link=doi) for auto-linking or to disable the feature (|title-link=none).

It is not necessary to specify a URL to a link identical to a link also produced by an identifier. The |url= parameter (or |title-link=) can then be used for providing a direct deep link to the corresponding document or a convenience link to a resource that would not otherwise be obviously accessible.

Quote

• quote: Relevant text quoted from the source. Displays enclosed in quotes. When supplied, the citation terminator (a period by default) is suppressed, so the quote must include terminating punctuation. If script-quote is defined, use quote to hold a Romanization (if available) of the text in script-quote.
  • script-quote: Original quotation for languages that do not use a Latin-based script (Arabic, Chinese, Cyrillic, Greek, Hebrew, Japanese, Korean, etc.); not italicized, follows italicized Romanization defined in quote (if available). Alias: none. Must be prefixed with one of the supported language codes to help browsers properly display the script:

    ... |quote=Tōkyō tawā |script-quote=ja:東京タワー |trans-quote=Tokyo Tower ...

  • trans-quote: English translation of the quotation if the source quoted is in a foreign language. Displays in square brackets. Alias: none.
• quote-page: The number of a single page quoted in |quote=. Use either |quote-page= or |quote-pages=, but not both. Should be a subset of the page(s) specified in |page=, |pages= or |at=. Displays preceded by p. unless |no-pp=yes. If hyphenated, use {{hyphen}} to indicate this is intentional (e.g. |quote-page=3{{hyphen}}12). Alias: none.
• OR: quote-pages: A list or range of pages quoted in |quote=. Use either |quote-page= or |quote-pages=, but not both. Should be a subset of the pages specified in |pages= or |at=. Separate using an en dash (–); separate non-sequential pages with a comma (,). Displays preceded by pp. unless |no-pp=yes is defined. Hyphens are automatically converted to en dashes; if hyphens are appropriate because individual page numbers contain hyphens, for example: pp. 3-1–3-15, use double parentheses to tell the template to display the value of |quote-pages= without processing it, and use {{hyphen}} to indicate to editors that a hyphen is really intended: |quote-pages=((3{{hyphen}}1{{ndash}}3{{hyphen}}15)). Alias: none.

Editors

• editor-last: surname of editor. Do not wikilink—use editor-link instead. Where the surname is usually written first—as in Chinese—or for corporate authors, simply use editor-last to include the same format as the source. Aliases: editor-last1, editor1-last, editor-surname, editor-surname1, editor1-surname, editor, editor1.
  • editor: This parameter is used to hold the complete name of a single editor (first and last), or the name of an editorial committee. This parameter should never hold the names of more than one editor.
  • editor-first: given or first names of editor, including title(s); example: Firstname Middlename or Firstname M. or Dr. Firstname M., Sr. Do not wikilink—use editor-link instead. Aliases: editor-first1, editor1-first, editor-given, editor-given1, editor1-given.
  • OR: for multiple editors, use editor-last1, editor-first1 through editor-lastn, editor-firstn (Aliases: editorn-last, editor-surnamen or editorn-surname; editorn-first, editor-givenn or editorn-given; editorn). For an individual editor plus an institutional editor, you can use |editor-first1=...|editor-last1=... |editor2=....
  • editor-link: title of existing Wikipedia article about the editor—not the editor's website; do not wikilink. Aliases: editor-link1.
  • OR: for multiple editors, use editor-link1 through editor-linkn (alias editorn-link).
  • name-list-style: accepts a limited list of keywords as value; when set to amp, ampersand, or &, inserts an ampersand between the last two names in a name list; when set to and, inserts the conjunction 'and' between the last two names of a name list; when set to vancdisplays name lists in Vancouver style when the lists use the last/first forms of name parameters. Alias: name-list-format (deprecated)
• veditors: comma separated list of editor names in Vancouver style; enclose corporate or institutional names in doubled parentheses. End with etal if appropriate:

  |veditors=Smythe JB, ((Megabux Corp.)), etal

  • editor-linkn and editor-maskn may be used for the individual names in |veditors=, as described above
• Display:

  Use display-editors to control the length of the displayed editor name list and to specify when "et al." is included.

  If authors: Authors are first, followed by the included work, then "In" and the editors, then the main work.

  If no authors: Editors appear before the included work; a single editor is followed by "ed."; multiple editors are followed by "eds."

Laysummary

• lay-url: URL link to a non-technical summary or review of the source; the URL title is set to "Lay summary". Alias: layurl.
  • lay-source: Name of the source of the lay summary. Displays in italics and preceded by a spaced endash. Alias: laysource.
  • lay-date: Date of the lay summary. Displays in parentheses. Alias: laydate.
  • lay-format: File format of the work referred to by lay-url; for example: PDF, DOC, or XLS; displayed in parentheses after lay summary. HTML is implied and should not be specified. File format annotation is automatically rendered when a PDF icon is displayed. Does not change the external link icon. Note: External link icons do not include alt text; thus, they do not add file format information for the visually impaired. See Using |format=

Display options

• mode: Sets element separator, default terminal punctuation, and certain capitalization according to the value provided. For |mode=cs1, element separator and terminal punctuation is a period (.); where appropriate, initial letters of certain words are capitalized ('Retrieved...'). For |mode=cs2, element separator is a comma (,); terminal punctuation is omitted; where appropriate, initial letters of certain words are not capitalized ('retrieved...'). To override default terminal punctuation use postscript.
• author-mask:
• contributor-mask:
• editor-mask:
• interviewer-mask:
• subject-mask:
• translator-mask:

  Replaces the name of the (first) author with em dashes or text. Set <name>-mask to a numeric value n to set the dash n em spaces wide; set <name>-mask to a text value to display the text without a trailing author separator; for example, "with". The numeric value 0 is a special case to be used in conjunction with <name>-link—in this case, the value of <name>-link will be used as (linked) text. In either case, you must still include the values for all names for metadata purposes. Primarily intended for use with bibliographies or bibliography styles where multiple works by a single author are listed sequentially such as shortened footnotes. Do not use in a list generated by {{reflist}}, <references /> or similar as there is no control of the order in which references are displayed. Mask parameters can take an enumerator in the name of the parameter (e.g. |authorn-mask=) to apply the mask to a specific name.

• display-authors:
• display-contributors:
• display-editors:
• display-interviewers:
• display-subjects:
• display-translators:

  Controls the number of author or editor names that are displayed when a citation is published. To change the displayed number of names, set display-authors and/or display-editors to the desired number. For example, |display-authors=2 will display only the first two authors in a citation (and not affect the display of editors). Likewise, |display-editors=2 will display only the first two editors (and all authors). |display-authors=0 and |display-editors=0 are special cases suppressing the display of all authors or editors including the et al. By default, all authors and editors are displayed. |display-authors=etal displays all authors in the list followed by et al. Aliases: none.

• postscript: Controls the closing punctuation for a citation; defaults to a period (.); for no terminating punctuation, specify |postscript=none – leaving |postscript= empty is the same as omitting it, but is ambiguous. Additional text or templates beyond the terminating punctuation may generate an error message. |postscript= is ignored if quote is defined.

Subscription or registration required

Citations of online sources that require registration or a subscription are acceptable in Wikipedia as documented in Verifiability § Access to sources. As a courtesy to readers and other editors, editors should signal restrictions on access to material provided via the external links included in a citation. These levels describe requirements or constraints related to accessing and viewing the cited material; they are not intended to indicate the ability to reuse, or the copyright status, of the material, since that status is not relevant to verifying claims in articles.

Four access levels can be used:

• access indicator for named identifiers:
  • free: the source is free to read for anyone
• access indicators for url-holding parameters:
  • registration: a free registration is required to access the source
  • limited: there are other constraints (such as a cap on daily views) to freely access this source
  • subscription: the source is only accessible via a paid subscription ("paywall")

As there are often multiple external links with different access levels in the same citation, each value is attributed to a specific external link.

Access indicators for url-holding parameters

Online sources linked by |url=, |article-url=, |chapter-url=, |contribution-url=, |entry-url=, |map-url=, and |section-url= are presumed to be free-to-read. When they are not free-to-read, editors should mark those sources with the matching access-indicator parameter so that an appropriate icon is included in the rendered citation. Because the sources linked by these url-holding parameters are presumed to be free-to-read, they may not be marked as free.

URL-holding and access-indicator parameters

URL	Access	Allowed keywords
|url=	|url-access=	registration limited subscription
|article-url=	|article-url-access=
|chapter-url=	|chapter-url-access=
|contribution-url=	|contribution-url-access=
|entry-url=	|entry-url-access=
|map-url=	|map-url-access=
|section-url=	|section-url-access=

Access indicator for named identifiers

Links inserted by named identifiers are presumed to lie behind a paywall or registration barrier – exceptions listed below. When they are free-to-read, editors should mark those sources with the matching access-indicator parameter so that an appropriate icon is included in the rendered citation. Because the sources linked by these named-identifier parameters are not presumed to be free-to-read, they may not be marked as limited, registration, or subscription.

Named-identifier and access-indicator parameters

Identifier	Access	Allowed keywords
|bibcode=	|bibcode-access=	free
|doi=	|doi-access=
|hdl=	|hdl-access=
|jstor=	|jstor-access=
|ol=	|ol-access=
|osti=	|osti-access=
|s2cid=	|s2cid-access=

Some named-identifiers are always free-to-read. For those named identifiers there are no access-indicator parameters; the access level is automatically indicated by the template. These named identifiers are:

• |arxiv=
• |biorxiv=
• |citeseerx=
• |pmc=
• |rfc=
• |ssrn=

TemplateData

This is the TemplateData for this template used by TemplateWizard, VisualEditor and other tools. Click here to see a monthly parameter usage report for this template based on this TemplateData.

TemplateData for Cite AV media

This template formats a citation to audiovisual media sources.

Template parameters

Parameter		Description	Type	Status
URL	url URL	The URL of the online location where the media can be found	String	suggested
Source title	title	The title of the source page on the website; displays in italics	String	suggested
Source date	date	Full date of the source; do not wikilink	Date	suggested
Author last name	last author author1 authors last1 people	The surname of the author; Do not wikilink - use author-link instead.	String	suggested
Author first name	first first1	Given or first name, middle names, or initials of the author; don't wikilink	String	suggested
Media type	type	Media type of the source; format in sentence case. Displays in parentheses following the title. Use one of the following as applicable: Motion picture, Television production, Videotape, DVD, Trailer, Video game, CD, Radio broadcast, Podcast.	String	suggested
Language	language	The language the source is written in, if not English. Displays in parentheses with "in" before the language name. Use the full language name or ISO 639-1 code.	String	suggested
Publisher	publisher	Name of the publisher; displays after title	String	optional
Year	year	Year of source being referenced. Do not use in combination with 'Source date'.	Number	optional
English translation of title	trans-title	The English translation of the title if the source cited is in a foreign language. Displays in square brackets after title. Use with the language parameter.	String	optional
Author article title	author-link authorlink1 authorlink author1-link author1link	Title of existing Wikipedia article about the author — not the author's website.	Page name	optional
Other contributors	others	Other contributors to the work, such as 'Illustrated by John Smith' or 'Translated by John Smith'.	String	optional
Place of publication	place location	Geographical place of publication; generally not wikilinked; omit when the name of the work includes the location.	String	optional
Original publication year	orig-year	Original publication year; displays after the date or year. For clarity, please supply specifics - such as 'First published 1859'.	String	optional
Place of publication (Alternate)	publication-place	If any one of publication-place, place or location are defined, then the location shows after the title; if publication-place and place or location are defined, then place or location are shown before the title prefixed with "written at" and publication-place is shown after the title.	String	optional
Edition	edition	When the publication has more than one edition; for example: "2nd", "Revised", and so forth. Appends " ed." after the field.	String	optional
Series	series version	When the source is part of a series, such as a book series or a journal where the issue numbering has restarted	String	optional
Volume	volume	For one publication published in several volumes. Displays after the title and series fields; displays in bold	String	optional
In-source location: Minutes	minutes	Time the event occurs in the source; followed by "minutes in".	Number	optional
In-source location: Time	time	Time the event occurs in the source; preceded by default text "Event occurs at time".	String	optional
In-source location: Time caption	time-caption timecaption	Changes the default text displayed before time	String	optional
In-source location: Page	page	The number of a single page in the source that supports the content. Use 'pages' instead for a range of pages.	Number	optional
In-source location: At	at	For when other in-source locations are inappropriate or insufficient.	String	optional
URL: Access date	access-date accessdate	Full date when the contents pointed to by url was last verified to support the text in the article; do not wikilink	Date	optional
URL: Archive URL	archive-url archiveurl	The URL of an archived copy of a web page, if or in case the url becomes unavailable.	String	optional
URL: Archive date	archive-date archivedate	Date when the original URL was archived; preceded by default text "archived from the original on". Use the same format as other access and archive dates in the citations.	Date	optional
URL: Original is dead	dead-url deadurl	When the URL is still live, but pre-emptively archived, set to No. This changes the display order with the title retaining the original link and the archive linked at the end	String	optional
Format	format	Format of the work referred to by url; for example: PDF, DOC, or XLS; displayed in parentheses after title. HTML is implied and should not be specified. Does not change the external link icon.	String	optional
Anchor ID	ref	Generates anchor with the given ID, allowing it to be made the target of wikilinks to full references. The special value 'harv' generates an anchor suitable for the harv template.	String	optional
Identifier	id	A unique identifier, used where none of the specialized identifiers are applicable	String	optional
Identifier: arXiv	arxiv	arXiv identifier; for example: arxiv=hep-th/9205027 (before April 2007) or arxiv=0706.0001 (since April 2007). Do not include extraneous file extensions like ".pdf" or ".html".	String	optional
Identifier: ASIN	asin	Amazon Standard Identification Number; if first character of asin value is a digit, use isbn.	String	optional
Identifier: Bibcode	bibcode	Bibcode; used by a number of astronomical data systems; for example: 1974AJ.....79..819H	String	optional
Identifier: DOI	doi	Digital object identifier; for example: 10.1038/news070508-7. It is checked to ensure it begins with 10.	String	optional
Identifier: ISBN	isbn	International Standard Book Number; for example: 978-0-8126-9593-9. Dashes in the ISBN are optional, but preferred. Use the ISBN actually printed on or in the book. Use the 13-digit ISBN – beginning with 978 or 979 – when it is available.	String	optional
Identifier: ISSN	issn	International Standard Serial Number; eight characters may be split into two groups of four using a hyphen, but not an en dash or a space.	String	optional
Identifier: JFM	jfm	Jahrbuch über die Fortschritte der Mathematik	String	optional
Identifier: JSTOR	jstor	JSTOR abstract; for example: "3793107"	Number	optional
Identifier: LCCN	lccn	Library of Congress Control Number. When present, alphabetic prefix characters are to be lower case.	String	optional
Identifier: Mathematical Reviews	mr	no description	String	optional
Identifier: OCLC	oclc	Online Computer Library Center	String	optional
Identifier: Open Library	ol	Open Library identifier; do not include "OL" in the value.	Number	optional
Identifier: OSTI	osti	Office of Scientific and Technical Information	String	optional
Identifier: PMC	pmc	PubMed Central; use article number for full-text free repository of a journal article, e.g. 345678. Do not include "PMC" in the value	Number	optional
Identifier: PMID	pmid	PubMed; use unique identifier	Number	optional
Identifier: RFC	rfc	Request for Comments	Number	optional
Identifier: SSRN	ssrn	Social Science Research Network	String	optional
Identifier: ZBL	zbl	no description	String	optional
Quote	quote	Relevant text quoted from the source. Displays enclosed in quotes. When supplied, the citation terminator (a period by default) is suppressed, so the quote needs to include terminating punctuation.	String	optional

This template produces COinS metadata; see COinS in Wikipedia for background information.